GPS tracker for OBD vehicle tracking
- All vehicles in view through tracking
- Easy installation through plug-and-track solution
- Applicable only in connection with DAKO-account
- All in one portal - View current positions of your truck fleet and light commercial vehicles in one portal.
- Save costs and increase productivity
- Route tracking
- Theft protection through geo-zones and notifications
- Seamless vehicle tracking
Seamless tracking for cars and vans
With the DAKO GPS tracker, you always keep an eye on the location of your vehicles thanks to location data that is updated several times every minute. Even if the reception should be bad, the transmitter collects GPS data in the integrated memory until they can be transmitted again.
The recording of position data is also possible in less developed regions without any problems, because the tracker receives both GPS and GNSS data.
The data is transferred from the tracking device directly to the DAKO telematics platform and can be viewed there. For this, you need a separate tariff.
No workshop required – Simply install the GPS tracker yourself
All workshop costs are eliminated because you can simply and safely plug the GPS tracker into the OBD socket (Plug and Track). The control LEDs let you know within seconds when the device is ready for use.
Thanks to the latest encryption technology, your position data always reaches you securely. The transmission via GPRS signal corresponds to the latest technical standards.
How does OBD vehicle tracking with a GPS tracker work?
As soon as the GPS tracker is plugged into the OBD socket, it sends encrypted data at short intervals via a SIM card to DAKO's data processing centre. There they are stored securely and can be accessed via TachoWeb. The tracking device must remain permanently plugged in for this.
Which data does the GPS tracker send?
Our OBD solution transmits encrypted position data.
What do I have to consider when using vehicle tracking?
Before you decide to use a GPS system, you should carefully check whether the use you intend to make of it complies with data protection laws.
- In order to use the GPS Tracker in this version for tracking purposes, you need a user account in the DAKO web portal.
- OBD II/CAN
- USB 2.0 interface
- internal GPS antenna
- internal GSM antenna
- WEEE-Reg.-Nr. DE 57318687
Power supply: Power supply +10 V to +30 V DC
Dimensions: 67 x 49 x 25 mm
Operating temperature: -25°C to +55
GPS/GLONASS: GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS
Quad-band 850/900 / 1800/1900 MHz
GPRS class 12 (up to 240 kbit/s)
Approvals: CE, E26
Registration according to ElektroG
- GPS tracker
The GPS tracker for OBD vehicle location is only available in combination with the subscription in the DAKO web portal.
Please note that this incurs additional costs.